You may have noticed that when you first load a keg into your machine, you get a spinning snake in the display. Don’t worry!
This means that the machine is calculating the temperature, so you can go ahead, connect your machine, and even pour yourself a beer, especially if you pre-chilled your keg.
The closer the beer temperature is to your cabinet temperature, the faster the snake will finish and you will get a temperature reading. This means that if you put a pre-chilled keg in the fridge in a machine that has been on for at least a couple of hours, you should get a temperature reading in less than 15 minutes.
The larger the difference in temperature between the keg and the machine, the longer the calculation could take. It can take up to an hour to calculate the temperature once you load the keg & close the door
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article